Home
My XJ (current)
84-86 Specs
Roll-on Paint Job
Hinge Issues
Tailight Mod
Headlight Mod
Front Bumper Fab
Rear Bumper Fab
Roof Rack Fab
Bedliner Application
Engine Rebuild 2.8
Engine Rebuild 350/5.7
Speedo Gears
Clutch Slave Door
Steering Box Swap
V8 Engine Swap
Electronics
Axles
Longarm Fab
Notes
Contact Me

Just notes on this page that may help others with Early XJ's.

Oil Pressure sending unit that works with the Oil Pressure Gauge (not the idiot light) is Borg Warner Part Number S768. There are many others that will also work but this is the one that I'm using. Napa did not show any units for a gauge in their computer but partsamerica.com showed many different units that work but none of the Schucks stores had them in stock. I found this one at Fats Auto Parts in Anchorage.

-------------------

Water Temp sending unit. I'm still looking for the correct one that works with the factory gauge. The one I bought from Schucks last year does not have the proper connector on it for my wiring harness. I've tried both wires on the connector that used to go to the idiot light but neither makes the gauge works.

-------------------

Holley 390cfm carb 0-8007 4160

Renew/Rebuild Kit 37-720 aka 37720
Trick Kit 37-933 aka 37933

-------------------